Kannan Rassiah, Aidy Ali, A Study on Mechanical Behaviour of Surface Modified Rice Husk/Polypropylene Composite Using Sodium Hydroxide, IJET Volume 8, International Journal of Engineering and Technologies (Volume 8)
    There are many studies has been done on the natural fibers of cellulose contents as a reinforcing material. Yet, the main challenge in the research of natural fiber is the poor compatibility. In this study, the surface modification techniques were performed on granular size rice husk (RH) such as untreated, boiled and sodium hydroxide (NaOH) treated reinforced polypropylene (PP) was consolidated to improve the mechanical properties. An internal mixer machine is set for four different composites compositions and the samples produced by hot press machine. The specimens were analyzed by different techniques such as hardness test, impact test, tensile test and scanning electron microscopy (SEM). This study shown that, the presence of NaOH indicates higher young modulus and hardness test value compared to boiled treated and untreated RH. While for the impact strength and tensile strength value shows untreated, boiled treated and NaOH treated PP/RH composite decreased when fiber loading increased. The morphological analysis was conducted to determine the effects of natural fiber bonding between the matrix materials after boiling and NaOH treatments for mechanical testing broken specimens.<i></i>
    Composite, Polypropylene, Rice Husk, Sodium Hydroxide, Treatment