Subscribe

Subscribe to our Newsletter and get informed about new publication regulary and special discounts for subscribers!

ILCPA > Volume 68 > Optical Study on Deposed Polystyrene Doped DCM...
< Back to Volume

Optical Study on Deposed Polystyrene Doped DCM Laser Dye Thin Films at Different Temperature

Full Text PDF

Abstract:

Polystyrene (PS) polymer doped with DCM laser dye thin films have prepared on glass substrate using casting method. The obtained PS doped with DCM thin films were treated at different annealing temperatures such (30, 40, 50, 60, 70) °C. It was observed from result that the allowed direct electronic transitions energy gap was increased from 2.21 up to 2.3e.V as the temperature increasing from 30-70°C. And the allowed indirect electronic transition energy gap rose from 0.06 to 0.15e.V as the temperature increasing. The allowed indirect phonon energy also was decreased at the same range of temperature. The different effect of temperature variation was observed on the optical properties of PS doped with DCM thin films.

Info:

Periodical:
International Letters of Chemistry, Physics and Astronomy (Volume 68)
Pages:
39-47
Citation:
A. S. Tuhaiwer, "Optical Study on Deposed Polystyrene Doped DCM Laser Dye Thin Films at Different Temperature", International Letters of Chemistry, Physics and Astronomy, Vol. 68, pp. 39-47, 2016
Online since:
July 2016
Export:
Distribution:
References:

[1] A. Pique, R.C.Y. Auyeung, J.L. Stepnowski, D.W. Weir, C.B. Arnold, R.A. McGill, D.B. Chrisey, Laser processing of polymer thin films for chemical sensor applications, Surface and Coatings Technology 163–164(2003), 293–299.

DOI: https://doi.org/10.1016/s0257-8972(02)00606-0

[2] T. Kashiwagi and A. Inabi, Behavior of Primary Radicals during Thermal Degradation of Poly(methyl methacrylate), Polymer Degradation and Stability, 26(1989), 161– 184.

DOI: https://doi.org/10.1016/0141-3910(89)90007-4

[3] D. R Paul, and C. B. Bucknall, Polymer Blends, , Willey Interscience, New York (2000).

[4] C. Harrats, S. Thomas, and G. Groeninckx, Micro - and Nanostructured Multiphase Polymer Blend Systems, Taylor & Francis Group, Boca Raton (2006).

[5] Ahmed Namah Mohamed, Akeel Shaker Tuhaiwer, Zaid Saud Razzaq, Optical Properties of Polyvinyl Chloride Doped with DCM dye Thin Films, 30(2016), 45-56.

[6] Galatsis, K.; Wang, K.; Botros, Y.; Yang, Y.; Xie, Y.H.; Stoddart, J.; Kaner, R.B.; Ozhan, C.; Liu, J.; Ozkan, M. Emerging memory devices, IEEE Circuits and Devices Magazine, 22(2006), 12–21.

DOI: https://doi.org/10.1109/mcd.2006.1657845

[7] Muccini, M. A bright future for organic field-effect transistors,. Nat. Mater., 5(2006), 605–613.

DOI: https://doi.org/10.1038/nmat1699

[8] Capelli, R.; Toffanin, S.; Generali, G.; Usta, H.; Facchetti, A.; Muccini, M. Organic light-emitting transistors with an efficiency that outperforms the equivalent light-emitting diodes,. Nat. Mater., 9(2010), 496–503.

DOI: https://doi.org/10.1038/nmat2751

[9] Deng, X.Y. Light-emitting devices with conjugated polymers,. Int. J. Mol. Sci., 12(2011), 1575–1594.

[10] M. H. Rezvani, F. Farajollahi, A. Nikfarjam, P. Bakhtiarpour and E. Saydanzad, Effect of Solvents, Their Mixture and Thermal Annealing on the Performance of Solution Processed Polymer Light-Emitting Diodes, Materials, 6(2013), 1994-(2006).

DOI: https://doi.org/10.3390/ma6051994

[11] Ahmed Namah Mohamed Studying the optical properties of thin films prepared from polystyrene doped with DCM dye,. 61(2015), 176-181.

DOI: https://doi.org/10.18052/www.scipress.com/ilcpa.61.178

[12] M. Maebayashia, T. Matsuoka, S. Koda, R. Hashitani, T. Nishio, S. -ichi. Kimura, Study on Polystyrene Thin Film on Glass Substrate by Scanning Acoustic Microscope", Elsevier, Polymer, 45(2004), 7563-7569.

DOI: https://doi.org/10.1016/j.polymer.2004.09.011

[13] O. BaoLi, L. DuXin, Preparation of Polystyrene/silica Nanocomposites by Radical Copolymerization of Styrene with Silica Macromonomer,. Sci. China. Ser. B-Chem., 50(2007), 385-391.

DOI: https://doi.org/10.1007/s11426-007-0069-x

[14] V.M. Zolotarev, B.Z. Volchek and E.N. Vlasova, Optical constants of industrial polymers in the IR region, Optics and Spectroscopy 101(2006), 716- 723.

DOI: https://doi.org/10.1134/s0030400x06110105

[15] G. Streetman Banerjee, Solid State Electronic Devices, the university of Texas at Austin, (2006).

[16] J. I. Pankove, Optical processes in semiconductors, , Prentice Hall, New York, (1971).

[17] H. Ulrich, Introduction to Industrial Polymers, New York, (1982).

[18] M. Balkanski, Optical Properties of Solids , vol2, Amsterdam, New York. Oxford (1992).

[19] B. O. Seraphin, Optical Properties of solid New Developments, company, American, Elsevier Publishing-New York, (1976).

[20] Y.T. Ravikiran, M.T. Lagare, M. Sairam, N.N. Mallikajuna, B. Sreebhar , S. Manohar , A.G. MacDiarmid, and T.M. Aminabhavi, Synthesis, characterization and low frequency AC conductivity of polyaniline/niobium pentoxide composites, Synthetic Metals 156, (2006).

DOI: https://doi.org/10.1016/j.synthmet.2006.10.002

[21] Sreelalitha Kramadhati, K. Thyagarajan, Optical Properties of Pure and doped (KnO3 & MgCl2) PVA polymer thin films, 6(2013), 15-18.

[22] M. Brodky, Amorphous Semiconductors, Sepringer- Verlag, Berlin, Heidelberg, (1979).

[23] D. W. Van Krevelen, K. te Nijenhuis, Properties of Polymers, 3rd edition Elsvier Science B.V. Amsterdam, the Netherland (2009).

Show More Hide
Cited By:
This article has no citations.