Novel Modeling of the Phenomenon of Air-Cooled Solid

Pluta, Zdzisław; Hryniewicz, Tadeusz

doi:10.18052/www.scipress.com/ILCPA.6.1

ILCPA > ILCPA Volume 6 > Novel Modeling of the Phenomenon of Air-Cooled...

< Back to Volume

Novel Modeling of the Phenomenon of Air-Cooled Solid

Full Text PDF

Abstract:

The paper turns the attention to the thermal problems of the solid cooling in air. The physical aspect of mathematic approach has been underlined. The analysis and critical evaluation of Newton’s Law concerning the solid air-cooling have been performed. The cognitive path leading to the solution is presented with the result being the body temperature dependence on time of cooling down in the air. Then the course of solution concerning the result of the adequate dependence of temperature of the cooled body on time has been presented. In the study, the stress is put on constant magnitudes which characterize the susceptibility of solid to the cooling in the air. In the end, the synthetic formulation of all functional characteristics of the thermal phenomenon discussed in the paper, have been presented.

Info:

Periodical:

International Letters of Chemistry, Physics and Astronomy (Volume 6)

Pages:

1-16

DOI:

https://doi.org/10.18052/www.scipress.com/ILCPA.6.1

Citation:

Z. Pluta and T. Hryniewicz, "Novel Modeling of the Phenomenon of Air-Cooled Solid", International Letters of Chemistry, Physics and Astronomy, Vol. 6, pp. 1-16, 2013

Online since:

January 2013

Authors:

Zdzisław Pluta, Tadeusz Hryniewicz

Keywords:

Cooling Rate, Phenomenon of Body Cooling, Potential Field, Temperature, Thermal Space-Time, Time, Time Constant

Export:

RIS, BibTeX, Text

Distribution:

Open Access

This work is licensed under a
Creative Commons Attribution 4.0 International License

References:

[1] Z. Osiński, Przegląd Mechaniczny, 51(16) (1996) 11-15 (in Polish).

[2] W. Bogusz, J. Giergiel, S. Kasprzyk, M. Zabawa, A. Muszyńska, J. Muszyński, B. Radziszewski, J. Szadkowski, Problems of stability in discrete systems. Non-linear vibrations, PWN, Warszawa 1971, 9-52 (in Polish).

[3] Z. Dąbrowski, Przegląd Mechaniczny 62(11) (2007) 15-18 (in Polish).

[4] A. Momber, R. Kovacevic, Principles of Abrasive Water Jet Machining, Springer-Verlag Berlin Heilderberg New York, (1988).

[5] A. Momber A., Kovacevic R., Manufacturing Science and Engineering 68(1) (1994) 361-366.

[6] E. Wantuch, R. Kot, Problem of projection accuracy of curvilinear path under treatment using high-pressure water-abrasive jet system (in Polish). Proc. of 26th Sci. School on Abrasive Treatment, Łódź, September 2003, 329-337.

[7] E. Wantuch, P. Dudek, T. Jarosz, R. Kot, Mechanik 79(4) (2006) 266-271 (in Polish).

[8] P. Słowik, W. Zowczak, Mechanik 81(11) (2008) 948-950 (in Polish).

[9] W. Zowczak, Przegląd Elektrotechniczny 7 (2008) 129-131 (in Polish).

[10] W. Wrona, Mathematics, Part 2 (in Polish), PWN, Warszawa (1967).

[11] Zdzisław Pluta, Fundamentals of surface smoothing by elastic abrasive wheels (in Polish). Wydawnictwo Politechniki Koszalińskiej, Koszalin (2007).

[12] Zdzisław Pluta, Tadeusz Hryniewicz, Int. J. Adv. Manuf. Technol. 51 (2010) 217-223 DOI: 10. 1007/s 00170-010-2595-5.

[13] Zdzisław Pluta, Tadeusz Hryniewicz, Int. J. Adv. Manuf. Technol. 62(5) (2012) 529-542, DOI: 10. 1007/s 00170-011-3813-5.

DOI: https://doi.org/10.1007/s00170-011-3813-5

Show More Hide

Cited By:

[1] P. Singare, "Radiotracers in kinetics of ion-isotopic exchange reactions using anion exchange resins indion-103 and indion-870", Colloid Journal, Vol. 76, p. 193, 2014

DOI: https://doi.org/10.1134/S1061933X14020112