Paper Titles in Periodical
International Letters of Chemistry, Physics and Astronomy
Volume 56

Subscribe

Subscribe to our Newsletter and get informed about new publication regulary and special discounts for subscribers!

ILCPA > Volume 56 > Physical, Mechanical and Thermal Properties of...
Physical, Mechanical and Thermal Properties of Sand Reinforced Polyester Resin Composite
< Back to Volume

Physical, Mechanical and Thermal Properties of Sand Reinforced Polyester Resin Composite

Full Text PDF

Abstract:

Sand reinforced polyester composite have been prepared by compression molding method with a variety of range (0,15,30,45 60%) sand respect to the unsaturated polyester resin. various parameter like mechanical, Physical and thermal properties of sand reinforced, polyester resin composite have been determined by various technique like water compressive strength ,flexural strength , hardness and thermal analysis. Physical properties like density and water intake increases with the addition of sand ,compressive strength increases but flexure strength decreases with the amount of sand, on hardness test, Vickers hardness increases but on leeb rebound it decreases with amount of sand, and finally thermal conductivity decreases with the addition of sand.

Info:

Periodical:
International Letters of Chemistry, Physics and Astronomy (Volume 56)
Pages:
99-103
DOI:
https://doi.org/10.18052/www.scipress.com/ILCPA.56.99
Citation:
M. M. Islam et al., "Physical, Mechanical and Thermal Properties of Sand Reinforced Polyester Resin Composite", International Letters of Chemistry, Physics and Astronomy, Vol. 56, pp. 99-103, 2015
Online since:
July 2015
Authors:
Md Mahfujul Islam, Md Alamgir Kabir, Humayun Kabir, Farid Ahmed, Md Abdul Gafur
Keywords:
Bulk Density, Composite, Elastic Deformation, Flexural Strength, Hardness, Polyester Resin, Reinforced, Sand
Export:
RIS, BibTeX, Text
Distribution:
Open Access

Creative Commons License
This work is licensed under a
Creative Commons Attribution 4.0 International License

References:

[1] http: /composite. about. com/od/aboutcompositesplastics/a/What-Is-A-Composite. html.

[2] http: /en. wikipedia. org/wiki/Polyester_resin.

[3] Introduction to Compression Molding". eFunda. Retrieved 19 March (2013).

[4] Hudson N. M. The Old China Book. p.7. ISBN 9781434477279, (1903).

[5] Chandrasekhar S, Satyanarayana K, Pramada P and Majeed J. Effect of calcinations temperature and heating rate on the optical properties and reactivity of rice husk ash. Journal of Materials Science (Norwell), 2006; 41(1): 7926-7933.

DOI: https://doi.org/10.1007/s10853-006-0859-0

[6] Rsultana, R akter, z. alam, International Journal of Engineering &Technology. IJET-IJENSVol: 13No. 02.

Show More Hide