Subscribe to our Newsletter and get informed about new publication regulary and special discounts for subscribers!

ILCPA > ILCPA Volume 40 > Using Electrochemical Noise Technique to Evaluate...
< Back to Volume

Using Electrochemical Noise Technique to Evaluate the Corrosion Performance of a Reinforcement Magnesium Alloy

Full Text PDF


AZ91D magnesium alloy was reinforced by titanium and boron carbides under an inert environment using in-situ reactive infiltration technique. The corrosion properties of the reinforced magnesium alloy were investigated using Electrochemical noise (EN) techniques in dilute Harrison solutions. The moving average removal (MAR) method was used as trend removal methods. The frequency of pitting events (ƒn) and the average charge in each pitting events (q) were calculated for each EN measurements. EN results shows that the addition of reinforcement improved the corrosion resistance of the magnesium alloy (R-Mg) and no signs of corrosion were observed during 10 days of immersion in the corrosive solution.


International Letters of Chemistry, Physics and Astronomy (Volume 40)
M. Gobara, "Using Electrochemical Noise Technique to Evaluate the Corrosion Performance of a Reinforcement Magnesium Alloy", International Letters of Chemistry, Physics and Astronomy, Vol. 40, pp. 61-72, 2015
Online since:
October 2014

Ghali E., Corrosion Resistance of Aluminum and magnesium Alloys. (2010), New York, USA: John Wiley & Sons, Inc. 321.

Ghali E., Magnesium and magnesium alloys, in Uhlig's Corrosion Handbook. (2000), John Wiley & Sons: New York. p.793.

Heming Wang R.A., Mohamed Gobara, Corrosion Science 52(8) (2010) 2565-2570.

G. Song, A. Atrens, Advanced Engineering Materials 5(12) (2003) 837-844.

Almajid E. -S.S. a.A.A., International Journal of Electrochemical Science 6 (2011) 2131-2148.

Yuan Guangyin S.Y., Ding Wenjiang, Scripta Materialia 43(11) (2000) 1009-1013.

Zhou W., Aung Naing Naing, Sun Yangshan, Corrosion Science 51(2) (2009) 403-408.

Byeong Ho Kim S.W.L., Yong Ho Park Ik Min Park, Journal of Alloys and Compounds 493(1-2) (2010) 502-506.

Le Thu Q., G.P. Bierwagen S. Touzain, Progress in Organic Coatings 42(3-4) (2001) 179-187.

Gui F., C.S. Brossia, Corrosion monitoring under coatings, in Techniques for corrosion monitoring, L. Yang, Editor. (2008 ), Woodhead Publishing Limited: Cambridge England.

Martin Jönsson, D.P. a.C.L., Corrosion Science 50 (2008) 1406-1413.

Zhiming Shi M.L., Andrej Atrens, Corrosion Science 52(2) (2010) 579-588.

Tan, Y., S. Bailey, and B. Kinsella, Corrosion Science 38(10) (1996) 1681-1695.

Ashassi-Sorkhabi H., D. Seifzadeh, Journal of applied electrochemistry 38(11) (2008) 1545-1552.

Ramezanzadeh B., et al., Applied Surface Science 289(0) (2014) 129-140.

Cottis R.A., et al., Electrochimica Acta 46(24-25) (2001) 3665-3674.

Chen A. -n., et al., Transactions of Nonferrous Metals Society of China 22(1) (2012) 228-240.

Song G., The corrosion and protection of magnesium alloys. (2006), Beijing: Chemical Industry Press of China.

A. Pardo, M.C.M., A.E. Coy, R. Arrabal, F. Viejo, E. Matykina, Corrosion Science 50(3) (2008) 823-834. ( Received 11 October 2014; accepted 20 October 2014 ).

Show More Hide
Cited By:

[1] K. Przywecka, K. Kowalczyk, B. Grzmil, "Sequential co-precipitation as a convenient preparation method of anticorrosive hybrid calcium phosphate/calcium silicate powder pigments", Powder Technology, 2020