Subscribe

Subscribe to our Newsletter and get informed about new publication regulary and special discounts for subscribers!

IJET > Volume 9 > Performance Evaluation of Reworked Weld Joints
Performance Evaluation of Reworked Weld Joints
< Back to Volume

Performance Evaluation of Reworked Weld Joints

Full Text PDF

Abstract:

This study presents the performance evaluation of reworked welded joint that have weld imperfections which may result the strength of the structures. Tensile, bending and shear tests have been performed to evaluate the performance and reliability of reworked joint. Their effects on the quality and performance of the reworked welded joint are depend on the requirements of the structure in use. This study is providing detailed examination of the mechanical properties of the carbon steel reworked welded joint by using shielded metal arc welding (SMAW) techniques.

Info:

Periodical:
International Journal of Engineering and Technologies (Volume 9)
Pages:
5-12
DOI:
https://doi.org/10.18052/www.scipress.com/IJET.9.5
Citation:
Sivarao et al., "Performance Evaluation of Reworked Weld Joints", International Journal of Engineering and Technologies, Vol. 9, pp. 5-12, 2016
Online since:
December 2016
Authors:
Sivarao, Aidy Ali, Mohd Amran, L.D. Sivakumar, Shukor Salleh, Rajaizam
Keywords:
Carbon Steel, Mechanical Properties, Shielded Metal Arc Welding
Export:
RIS, BibTeX, Text
Distribution:
Open Access

Creative Commons License
This work is licensed under a
Creative Commons Attribution 4.0 International License

References:

[1] Welding Technology Institute of Australia, Post weld heat treatment of welded structures, Guidance Note 6, Welding Technology Institute of Australia, Australia, (2003).

[2] R.W. Messler, Joining of materials and structures, Burlington: Butterworth-Heinemann, (2004).

[3] R. Sudhakaran, V. Vel-Murugan, P.S. Sivasakthivel, Effect of Process Parameters on Depth of Penetration in Gas Tungsten Arc Welded (GTAW) 202 Grade Stainless Steel Plates Using Response Surface Methodology, Journal of Engineering Research. 9(1) (2012).

[4] R. Khan, Anisotropic deformation behavior of Al2024T351 aluminium alloy, The Journal of Engineering Research. 10(1) (2013) 80-87.

[5] E.A. Al-Bahkali, Load-displacement curves of spot welded, bonded, and weld-bonded joints for dissimilar materials and thickness, The Journal of Engineering Research. 8(2) (2011) 32-39.

[6] T.V. Rajan, C.P. Sharma, A. Sharma, Heat treatment: principles and technique, 2nd edn., New Delhi, PHI Learning Private Limited, (2011).

Show More Hide
Cited By:
This article has no citations.