Subscribe

Subscribe to our Newsletter and get informed about new publication regulary and special discounts for subscribers!

IJET > Volume 7 > Analysis of the Requirements of the Wire Rod...
< Back to Volume

Analysis of the Requirements of the Wire Rod Production Standards in Ukraine

Full Text PDF

Abstract:

It is observed the dynamic of changes in the requirements of national and international standards for production of wire rod. It is shown that the general trend in changing of requirements is not a tightening of technical parameters but in some cases the extension of the range of variation of parameters, which provides the wide opportunities for producers.

Info:

Periodical:
International Journal of Engineering and Technologies (Volume 7)
Pages:
78-86
DOI:
10.18052/www.scipress.com/IJET.7.78
Citation:
S. D. Yershov et al., "Analysis of the Requirements of the Wire Rod Production Standards in Ukraine", International Journal of Engineering and Technologies, Vol. 7, pp. 78-86, 2016
Online since:
May 2016
Export:
Distribution:
References:

[1] H3 – Wire Rod Mills, Bar-in-coil, Long products, Daniely, Relies 310, Information on http: /www. danieli. com.

[2] Morgan Rod Reducing and Sizing Mill. Setting the standard in rod rolling for unsurpassed productivity, tolerances and mechanical properties, Siemens-VAI, 2013, Information on www. industry. usa. siemens. com.

[3] T. Sakurai, T. Sakamoto, R. Takeda, Development of high dimensional accuracy smaller diameter wire rods and square coils manufactured by 4-Roll, Kawasaki steel technical report, N. 47 (2002) 42 – 47.

[4] M. Zuccato, M. Tomba, A. Fontanini, N. Tomba, Second generation of Bi-Support rolling stands, Metallurgical Plant and Technology International, Vol. 36, N. 1 (2013) 48 – 50.

[5] Y. Noguchi, H. Ogai, K. Okamura, Characteristics of continuous wire rod rolling and precision rolling, Nippon steel technical report, N. 80 (1999) 79 – 83.

[6] А. P. Chekmariov, M. S. Mutiev, R. А. Mashkovtcev, Roll design, Metallurgy, Moscow, (1971).

[7] DSTU 4738: 2007, GOST 2590-2006, Profiles round of hot-rolled steel, Assortment, Derzhspozhivstandart, Kyiv, (2008).

[8] DSTU 2770-94, GOST 30136-95, ISO 8457/1-89, Rolled carbon steel of usual quality, Technical conditions, Derzhspozhivstandart, Kyiv, (1996).

[9] DSTU 3683-98, Rolled steel cable, Specifications Derzhspozhivstandart, Kyiv, (1998).

[10] DSTU ISO 16120-1: 2009, Non-alloy steel wire rod for conversion into wire, Part 1, General Derzhspozhivstandart, Kyiv, (2011).

[11] DSTU ISO 16124: 2009, Wire rod steel, Dimensions and tolerances Derzhspozhivstandart, Kyiv, (2011).

[12] ASTM A510M-06, Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel, and Alloy Steel, (2006).

DOI: 10.1520/a0510_a0510m-11

[13] JIS G 3505: 2004, Low carbon steel wire rods, STANDARD by Japanese Industrial Standard, Japanese Standards Association, (2004).

[14] R. Seki, K. Hasegawa, K. Nakajima, K. Yoshimura, Making to high performance and productivity improvement of steel bar and wire rod rolling process , Nippon steel technical report, N. 96 (2007) 21 – 28.

[15] Steel bars and wire rods from JFE, JFE Steel Corporation, Information on http: /www. jfe-steel. co. jp.

Show More Hide