IJET Volumes

All Volumes

2017
2016
- Volume 9
- Volume 8
- Volume 7
- Volume 6
2015
- Volume 5
- Volume 4
2014

Volume 7

See as eBook

P. 1

Performance Evaluation of Free Vibration of Laminated Composite Stiffened Hyperbolic Paraboloid Shell Panel with Cutout

Authors: Sarmila Sahoo

Citation: S. Sahoo "Performance Evaluation of Free Vibration of Laminated Composite Stiffened Hyperbolic Paraboloid Shell Panel with Cutout", International Journal of Engineering and Technologies, Vol. 7, pp. 1-24, 2016

P. 25

Effect of Al-Doping on the Optical Properties of ZnO Thin Film Prepared by Thermal Evaporation Technique

Authors: M. Musaab Khudhr, Khalid Haneen Abass

Citation: M. Musaab Khudhr and K. H. Abass, "Effect of Al-Doping on the Optical Properties of ZnO Thin Film Prepared by Thermal Evaporation Technique", International Journal of Engineering and Technologies, Vol. 7, pp. 25-31, 2016

P. 32

An Investigation on Effect of Depth of Cut, Feed Rate and Tool Nose Radius on Induced Vibration and Surface Roughness during Hard Turning of 41Cr4 Alloy Steel Using Response Surface Methodology

Authors: Christopher Okechukwu Izelu, Samuel Chike Eze

Citation: C. O. Izelu and S. C. Eze, "An Investigation on Effect of Depth of Cut, Feed Rate and Tool Nose Radius on Induced Vibration and Surface Roughness during Hard Turning of 41Cr4 Alloy Steel Using Response Surface Methodology", International Journal of Engineering and Technologies, Vol. 7, pp. 32-46, 2016

P. 47

Effect of Automotive Side Member Materials on the Head Injury Criteria (HIC) and Chest Severity Index (CSI) of Adult Passenger

Authors: M.S. Salwani, Aidy Ali, B.B. Sahari, A.A. Nuraini

Citation: M.S. Salwani et al., "Effect of Automotive Side Member Materials on the Head Injury Criteria (HIC) and Chest Severity Index (CSI) of Adult Passenger", International Journal of Engineering and Technologies, Vol. 7, pp. 47-59, 2016

P. 60

Inhibitive Effect of Costus afer Extracts on Mild Steel Corrosion in Acidic Medium

Authors: Lebe A. Nnanna, Wisdom O. John, Tochukwu E. Esihe, Kelechi C. Denkoro, Victor I. Okparaku, Kings O. Uchendu

Citation: L. A. Nnanna et al., "Inhibitive Effect of Costus afer Extracts on Mild Steel Corrosion in Acidic Medium", International Journal of Engineering and Technologies, Vol. 7, pp. 60-67, 2016

P. 68

Study on the Mechanical Properties of Palm Kernel Fibre Reinforced Epoxy and Poly-Vinyl Alcohol (PVA) Composite Material

Authors: Osita Obiukwu, Ignatius Opara, Henry Udeani

Citation: O. Obiukwu et al., "Study on the Mechanical Properties of Palm Kernel Fibre Reinforced Epoxy and Poly-Vinyl Alcohol (PVA) Composite Material", International Journal of Engineering and Technologies, Vol. 7, pp. 68-77, 2016

P. 78

Analysis of the Requirements of the Wire Rod Production Standards in Ukraine

Authors: Serhiy D. Yershov, Volodymyr Samokhval, Yuri Antonov, Gregory Medinsky

Citation: S. D. Yershov et al., "Analysis of the Requirements of the Wire Rod Production Standards in Ukraine", International Journal of Engineering and Technologies, Vol. 7, pp. 78-86, 2016

P. 87

Performance Evaluation of Aro-Ndizuogu Local Clay in Alkyd Paint Production

Authors: Isaac O. Igwe, Chinomso M. Ewulonu, Augustine N. Chikei, B. Nicholas

Citation: I. O. Igwe et al., "Performance Evaluation of Aro-Ndizuogu Local Clay in Alkyd Paint Production", International Journal of Engineering and Technologies, Vol. 7, pp. 87-93, 2016

P. 94

Optimization of Wear Performance of Electroless Ni-B Coating under Lubrication

Authors: Santanu Duari, Arkadeb Mukhopadhyay, Tapan Kumar Barman, Prasanta Sahoo

Citation: S. Duari et al., "Optimization of Wear Performance of Electroless Ni-B Coating under Lubrication", International Journal of Engineering and Technologies, Vol. 7, pp. 94-103, 2016