Subscribe

Subscribe to our Newsletter and get informed about new publication regulary and special discounts for subscribers!

IJET > Volume 6 > A Review and Technology Analysis of Rolling...
< Back to Volume

A Review and Technology Analysis of Rolling Channel Sections in Rolling Mills in the CIS

Full Text PDF

Abstract:

Requirements for the quality of finished products is continuously increasing. It adducts to improve existing and develop of new schemes roll design. This paper contains the analysis of technological schemes for rolling channels, which are used in the CIS countries. Were described different ways of rolling channels and design features roughing and finishing passes. The authors were compared schemes of UPN-shaped profiles’ rolling on different Iron and Steel Works. The article describes methods for improving the roll design, proposed and implemented by domestic developers. These methods are based on the gained experiences of flange profiles’ rolling and developments of the modern world. It makes possible to reduce manufacturing costs and improve product quality of the channels.

Info:

Periodical:
International Journal of Engineering and Technologies (Volume 6)
Pages:
8-19
Citation:
S. Yershov et al., "A Review and Technology Analysis of Rolling Channel Sections in Rolling Mills in the CIS", International Journal of Engineering and Technologies, Vol. 6, pp. 8-19, 2016
Online since:
February 2016
Export:
Distribution:
References:

[1] B. M. Iljukovich, N. E. Nehaev and V. P. Kapeljushnyj, Rolling and calibration, 6 vols. Vol. 5, Calibration of channel-shaped and trough-shaped profiles (in Russian), Dnipro-Val, Dnepropetrovsk, (2004).

[2] U. V. Konovalov, A. A. Minaev, Metallurgy (in Russian), 3 vols, DonNTU, Donetsk, (2013).

[3] V. K. Smirnov, V. A. Shilov and Ju. V. Inatovich, Roll pass design (in Russian), Teplotehnik, Moscow, (2010).

[4] A. P. Grudev, L. F. Mashkin and M. I. Hanin, The technology of rolling production (in Russian), Metallurgija, Moscow, (1994).

[5] D. I. Starchenko, Unfolded calibration of shaped sections (in Russian), Metallurgizdat, Moscow, (1952).

[6] I. Ya. Tarnovskij, A. N. Skorohodov and B. M. Iljukovich, Elements of the rolling's theory of complicated profiles (in Russian), Metallurgija, Moscow, (1972).

[7] G. V. Bergeman et al, Modern channel's production technologies with unfolded rolls calibration (in Russian), Art-Press, Dnepropetrovsk, (2007).

[8] M. B. Luckij, I. K. Dorozhko, A. A. Chichkan and V. A. Lucenko, Development and assimilation of the new scheme rolling channels (in Russian), Proceedings of the Fifth International Scientific-Technical Conference Theoretical problems of rolling production, (Dnepropetrovsk, 16 - 18 May 2000), J. Metallurgical and Mining Industry. 8 – 9 (2000).

[9] A. A. Chichkan, Development of elements of the theory and production technology of the channels in shaped calibers with alternating bending wall (in Russian), PhD in Technical Sciences Dissertation, Alchevsk, (2000).

[10] S. V. Ershov, S. N. Mel'nik, K. G. Gejmur and E. A. Kravchenko, Experimental and theoretical study of the deformed state of metal at the channels rolling (in Russian), in: Innovative technologies and material handling equipment in mechanical engineering and metallurgy, NTU HPI", Har, kov, 43 (2014).

[11] V. K. Smirnov, V. K. Shilov and Ju. V. Inatovich, Roll pass design (in Russian), Metallurgija, Moscow, (1987).

[12] N. V. Litovchenko, Calibration of profiles and rolls (in Russian), Metallurgija, Moscow, (1990).

[13] R. E. Bejnon, Grooving and the location of the rolling mills (in Russian), Metallurgizdat, Moscow, (1960).

[14] E. A. Demidovich, N. I. Pindjurin, Rolling of lightweight profiles 550 mill (in Russian), J. Metallurgist. 7 (1961) 20 – 23.

[15] A. P. Chekmarev, I. V. Gunin and R. A. Mashkovcev, Production of lightweight rolled profiles (in Russian), Metallurgija, Moscow, (1965).

[16] V. V. Getmanec, S. S. Til'ga, A. G. Kuz'menko and V. L. Romanchenko, Reference book of calibrator (in Russian), Mineral, Krivoj Rog, (1995).

[17] M. M. Gelerman, N. P. Borodij, Roller fitting semi-medium-section mill (in Russian), J. Metallurgist. 3 (1976) 35 – 37.

[18] M. B. Luckij, A. A. Chichkan and V. A. Lucenko, Features of channels production in passes with variable wall's bending (in Russian), J. Black metals. 12 (2008) 23 – 28.

[19] G. V. Bergeman et al, Application of unfolded roll pass design using prefinishing pass in the production of a new type of channels in the medium-section mill - 550 DMP named after Petrovsky (in Russian), in: Improving processes and metal forming equipment in metallurgy and mechanical engineering, DSMA, Kramatorsk, 2006, p.242.

[20] G. V. Bergeman, New way to the expanded calibration rolls for channels rolling with open control and prefinishing pass (in Russian), J. Metallurgical and Mining Industry. 5 (2007) 60 – 63.

[21] V. S. Maramzin, I. A. Sharapov and V. V. Dorofeev, Improvement of calibration U-shape profiles (in Russian), J. Steel. 3 (1991) 47 – 49.

[22] V. V. Pavlov, V. V. Dorofeev, E. M. Pjatajkin and V. V. Erastov, Development of advanced technologies and calibrations rolling mills of Novokuznetsk Iron and Steel Plant (in Russian), Nauka, Novosibirsk, (2006).

[23] A. N. Lucenko et al, Way of the channels rolling, Russian Federation Patent 2301118. (2007).

[24] A. N. Lucenko et al, Way of the channels rolling, Russian Federation Patent 2350408. (2009).

[25] A. G. Tubol'cev, Experience and application problems of cages design of Dnepropetrovsk Metallurgical Institute with undriving vertical rolls in the channels rolling (in Russian), J. Metallurgical and Mining Industry. 8 – 9 (2002) 226 – 231.

[26] Ju. V. Rozhdestvenskij, Improving the quality of channels (in Russian), J. Metallurgical and Mining Industry. 8 – 9 (2002) 300 – 302.

[27] B. N. Matveev, Modern rail rolling mills (in Russian), Bulletin of scientific, technical and economic information, Ferrous metallurgy. 2 (2006) 40 – 43.

[28] V. V. Dorofeev, Development of the theory and practice of the calibration process and the rolling of flange profiles (in Russian), Doctor of Engineering Science Dissertation, Novokuznetsk, (2012).

[29] V. F. Nugumanov, On the 70th anniversary of Chelyabinsk Metallurgical Plant (in Russian), J. Steel. 3 (2013) 4 – 6.

[30] S. I. Ogorodnikov, A. E. Popov and O. V. Zagumennov, Mastering the production of shaped sections in the universal rail rolling mill (in Russian), J. Steel. 11 (2013) 46 – 47.

[31] SMS Meer Gmbh, Varietal and billet rolling mills (in Russian).

Show More Hide