Subscribe

Subscribe to our Newsletter and get informed about new publication regulary and special discounts for subscribers!

IFSL > Volume 2 > XRD Studies on Titanium Substituted Manganese-Zinc...
< Back to Volume

XRD Studies on Titanium Substituted Manganese-Zinc Ferrite System, Mn0.8+xZn0.2TixFe2-2xO4 with x=0.10, 0.15, 0.20

Full Text PDF

Abstract:

Mn0.8+x Zn0.2TixFe2-2xO4 where x=0.1, 0.15, 0.20 were prepared by conventional solid state reaction technique starting with AR grade MnO, ZnO, TiO2 and Fe2O3. Final sintering was done at 1150°C for 20 hours followed by slow cooling to room temperature. The sample was analyzed by X-ray Diffraction (XRD), Particle size determination, SEM and EDX. The comparison of XRD results with JCPDS files confirmed the single phase spinel structure. Scanning Electron Microscopy (SEM) studies revealed that the average grain size of samples as 10μm. EDX spectrum shows the elements of the sample. X-ray instrumental broadening analysis was used to evaluate the size and lattice strain by the Williamson-Hall Plot method.

Info:

Periodical:
International Frontier Science Letters (Volume 2)
Pages:
40-51
DOI:
10.18052/www.scipress.com/IFSL.2.40
Citation:
D.J. Satheesh et al., "XRD Studies on Titanium Substituted Manganese-Zinc Ferrite System, Mn0.8+xZn0.2TixFe2-2xO4 with x=0.10, 0.15, 0.20", International Frontier Science Letters, Vol. 2, pp. 40-51, 2014
Online since:
Oct 2014
Export:
Distribution: